Posted by Steve@Advance on August 23, 2017 at 17:45:16 from (66.169.147.211):
In Reply to: Super A valve lash posted by HVFDfirefighter on August 23, 2017 at 16:55:21:
That valve setting method will get it close enough to run.
But, before putting the gas tank back on, connect it up with a hose, or some way to get fuel to the carb.
Leave the valve cover off, fill the radiator, start it up.
Check the rockers to be sure they are oiling. Won't oil much, but every rocker must have some sign of oil welling up and dripping around the shaft.
Let it run long enough to get up to temperature, watch for leaks, anything abnormal.
Then shut it off, be ready to retorque the head bolts while it is still warm.
Then when it has cooled off, reset the valve lash. You can use the same method for setting them, but be sure to start it up and listen for any loose ones. You can stick the feeler gauge in each rocker to tell which one is noisy.
I prefer to set them one at a time, hand turning the engine through with the plugs out, moving the feeler gauge between the rocker and valve as I turn the engine, feeling for the loosest point. Takes a little longer, but I know they are right when finished.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
Latest Ad:
1953 Ford Jubilee Tractor. Last driven 5 yrs ago. Parked ever since. As is as seen
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.