Posted by Fleeter on September 15, 2017 at 08:13:11 from (174.88.15.159):
In Reply to: Hydraulic ? posted by lti on September 14, 2017 at 21:57:25:
Oil pumps are usually self priming and positive displacement.
Theoretically you should be able to lift up to 37.7 feet with 9 oil at a .9 specific gravity - assuming the reservoir is vented to atmosphere.
Your limiting factors will be the net positive suction head required (NPSHR) for the pump - which accounts for the losses in the pump and the frictional losses from flow in the suction line.
Not likely a problem if your suction line is at least the size of the pump suction and reasonably short. A smaller dia. line will restrict flow and decrease the net positive head available (NPSHA).
Oil does not have a vapor pressure at normal operating temperatures, so you should not have cavitation in the pump.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
