Posted by timsh on October 29, 2017 at 19:21:54 from (50.25.169.143):
On my Oliver 1550, I cannot get the PTO to engage after replacing the PTO clutch disc. Having an issue with the linkage and which way the PTO fork and linkage should align on the manual PTO clutch handle. Anyone have a picture of how the linkage that connects to the forks inside the housing how the rod and other linkage should be set to operate the clutch engage and disengage position. I have shimmed the clutch disc as noted in the repair manual, now thinking the linkage that engages and disengages clutch in not correct position. This is nothing more than a fork that pivots inside the PTO housing, the fork should apply enough pressure so the clutches engage and release pressure moving handle in opposite direction to disengage the clutch. When I operate the PTO it will barely engage and I have to move the handle in either direction to keep the clutches engaged. Could be I added too many shims but unsure how to proceed. I have the Oliver manual and it is worthless for this repair and adjustments.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
