Posted by Mtf on January 21, 2018 at 21:06:32 from (66.38.105.244):
In response to your reply from a couple posts down about in rolling hay. I have really good success with in rolling hay and have for several years now. The ground here in south central ky is rolling, probably more than where you are. When the ground is very soft, I unroll in a different field to keep the cows from trampling and creating a muddy mess. When the ground is dry I will concentrate my feeding in one paticular field between 5 and 10 acres.
My rolls are 5 x 6 and I find that 1 roll to 40 momma cows works good for me. You need to feed only enough that they will eat in one day or they will start bedding down in it and messing in it.
I like feeding this way because you don't have the mess around the hay rings. It has reduced the number of cases of scours in calves. The cows distribute their own manure. Best of all I reduced the amount of hay I feed by 20%. It is not just me either most of my neighbors feed hay this way. Nathan
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
