Re: JD 401 industrial LIft Shafts

Posted by Tx Jim on March 31, 2018 at 03:15:58 from (166.137.118.85):

In Reply to: JD 401 industrial LIft Shafts posted by 37chief on March 30, 2018 at 17:55:17:

Have you tried changing the setting of L/D lever under seat? Have you checked to determine if rockshaft when raised is at maximum rotation(height)? This check should be accomplished with no implement on 3 pt hitch. With engine running raise 3 pt by moving control handle fully to the rear then manually lift on one draft to determine if it can be raised any more. If draft arm raises the the hyd mechanism needs to be adjusted as outlined in a JD 401 tech manual. Be careful not to adjust so it attempts to raise too high as I've witnessed rockshaft housings cracked from trying to raise too high.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]