Posted by ptfarmer on April 20, 2018 at 11:42:37 from (70.114.32.211):
In Reply to: OT: Pole Barn In Stages? posted by Ken Christopherson on April 20, 2018 at 09:26:39:
On my 24'x48" pole barn I got 3"x1/4" wall pipe on 12' centers around the perimeter. The trusses are also made from 3"x 1/4" wall pipe with 1 truss every 12' spanning 24' (2/12 pitch) with 2"x6"x24' purlin. My pole barn is all welded together with the sheet metal screwed on. If I had to do over again I would do the concrete first then put the barn up. If you put the barn up first, then when it come time for concrete you will be amazed as to how much stuff you have to move out of the barn.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
