Posted by Sprint 6 on April 29, 2018 at 06:24:13 from (107.77.85.27):
First chance I have had to respond to my detractor regarding my post on why the coolant level raises in a 5.3 coolant tank when the pressure cap is removed on a hot system. It occurred to me that some individuals may not understand what is happening in a closed cooling system when the coolant is heated under pressure. The average system has a 16psi cap, which effectively makes the pressure on the system 30.7psi, give or take (14.7 atmospheric + 16psi). This is done because raising the pressure on an antifreeze/water mixture raises its boiling point. We all know that a heated coolant mix expands. The pressure exerted on the coolant by the sealing of the system also controls the coolant from expanding as much as it would at atmospheric pressure. So, when the cap is removed while hot, the coolant immediately expands to its natural state at atmospheric pressure based on its temperature, and will also immediately boil if the coolant is near its boiling point at atmospheric pressure. This is why it is not recommended to remove the cap from a hot system, as the expansion and boiling can cause scalding. Hope this helps, and saves someone from severe burns. Had a friend that had major burns from a radiator incident, it's not pretty.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.