Pretty rare to ever wear out a set of shoes on one of them, more likely either oil saturated from a bad axle seal or a leaking wheel cylinder has soaked the linings in brake fluid.
Shops that will reline your shoes are still out there.
Going by memory if yours has the backing plates I am thinking of there should be two bolts at the top of the backing plate that are connected to cams for adjusting the shoes.
To adjust picture two wrenches, one on each bolt pointing up side by side, the direction to turn each cam to move the shoe closer to the drum is the direction it would require to move the top of the wrenches away from each other.
Some of these had a remote mount vacuum booster mounted under the drivers seat, some were under the hood either way a pressure test will give you a good idea of there condition.
800 to 1200 PSI is acceptable.
One more thing, if someone has messed with it and the idle speed is too high then there is nothing that will ever stop it with the torque it has coming off the planetary gears.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An AC Model M Crawler - by Anthony West. Neil Atkins is a man in his late thirties, a mild and patient character who talks fondly of his farming heritage. He farms around a hundred and fifty acres of arable land, in a village called Southam, located just outside Leamington Spa in Warwickshire. The soil is a rich dark brown and is well looked after. unlike some areas in the midlands it is also fairly flat, broken only by hedgerows and the occasional valley and brook. A copse of wildbreaking silver birch and oak trees surround the top si
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
