Posted by Determined on June 17, 2018 at 07:46:35 from (216.130.212.201):
In Reply to: Egg Preserver posted by Frank 41 on June 16, 2018 at 20:05:29:
Quoting Removed, click Modern View to see
Regarding your question of why not properly repair it got me thinking about an old truck I aquired for less than scrap value.
An old Chevy 3-ton, I used it to haul bales in off the field, it had an appetite for coolant, it never left a puddle, nothing in the oil nor could you detect anything in the exhaust.
Used it for 2 weeks out of the year like that for 5 years, it consistently would need a gallon of water added each day.
Considering that the cab was rusted out with plywood for floorboards, tires were all bald, no brakes or lights and the engine was old and tired it would not have made sense to spend a nickel on it let alone fix it properly.
Sometimes a person gets by with what they got until they can afford better.
Once the clutch finally gave up the old heap of rust was parked for good and it was replaced with something better.
When something is severely worn out, sees limited use and never leaves the property, so long as it can get the job done run her till she blows sometimes simply makes the most sense.
In a perfect world there would be no need for duct tape, baling wire, JB weld etc. But I am not holding my breath expecting that day to ever come.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
