Posted by paul on June 20, 2018 at 08:18:25 from (76.77.197.114):
In Reply to: New posted by ridgeandvalley on June 20, 2018 at 08:00:14:
I'd sure like to have a 3pt also on your list of features, there just is so much options out there with 3pt..... the two models you mention didn't come with 3pt, there are aftermarket options.....
Another thing to consider is the number of gears. More is better, if you have 6 instead of 5, great. If the 400 has a working TA, it will have 10 forward, 2 reverse, even better. And so forth.
If you are in snow country you probably want a snow blower some day. More reverse gears are better, needed. If you are a small operation you might want a tiller on a three point, having a very slow first beat is ever so good.....
You need 40hp for the haybine don't you, and be better to have 50?
Most of the features you mention started showing up mid to late 1950s, so would start there. Some of these features were options, so you have to look at the individual tractor, not just the series.
Ford 860 to 5000 series would be good. That is a large number of models, but there were a lot of good ones in there that would do what you want.
Oliver tends to be cheaper, and had some good models, I forget when 3pt showed up on them, 550? They tended to be one of the first to have the other features you want.
Good luck on the hunt, it's fun to go through all the possibilities, and sort wants from needs and then remembering reality and a budget.....
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.