Posted by jeffcat on August 21, 2018 at 15:25:22 from (99.203.17.216):
In Reply to: New Split Sickle Knife posted by James Howell on August 21, 2018 at 07:57:54:
You can look at this a couple of ways. Your clips should allow the bolts, or riviets to pass under and to work. There are extra height clips just for allowing bolts to pass through. That kit looks pretty slick. Now if you know about sickle bars then don't read any further. I had to make a custom knife and this is how I did it. Now here is where we get crazy. Go to your local metal supply place and pick up a section of steel strap. Trying to remember if it is 1/8 or 3/16 thick. The width is 1/2 or 5/8 wide. Made my own for a Gravely like 3 or 4 years ago. You collect all of the parts you need and take the old knife and grind all or the rivets out. Remove the knife sections, vice grip the old and new bars together as a guide and start drilling holes. It takes some time but it really isn't that bad. When done you have a perfect fit custome made knife. One thing is you need to learn how to rivit correctly. If done correctly the rivits will look like little metal toad stools. They are SOOOO tight that a bolt wouldn't come close. See if you can find a friend with an anvil and knows how to rivit. Have fun!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Brief History of Tractors in Australia - by Bob Kavanagh. After Captain Cook's exploration of the east coast in 1770 the British Government decided to establish a penal colony in Australia. The first fleet arrived in 1788 and consisted mainly of convicts who were poorly equipped and new little of farming techniques. The colony remained far from self-supporting and it was not until the early 1800's that things started to improve. Free settlers started to arrive, they followed the explorers across the mountains and where land was suitable set up farms. T
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.