Posted by gears on September 05, 2018 at 18:03:35 from (69.81.131.202):
So I inherited an old Simplicity from a friend (1973 Soveriegn 3614H) and it's powered by a big old cast iron B&S 16hp horizontal shaft single cylinder. The stupid thing runs fine for about 28 minutes then sputters and you can only keep it running if you throttle down to 1/4 or less. Park it for the day and next time you come out it runs fine......for about 28 minutes!
Every time I work on it, it acts like it's fixed, for about 28 minutes.
1. We thought it was the coil. Have to pull the motor to get the airshroud off to change the coil so I bypassed it and have the factory points firing a battery ignition. Ran great for 28 minutes.
Dies off and still has nice blue spark when it dies.
2. Carb had a cobbled gasket, rebuilt it with new oem parts. 28 minutes.
3. Removed the PO's inline fuel filter thinking it was plugging up. 28 minutes.
5. It's got to be the valves, they heat up, lash is too tight, after running long enough to come up to temp it has to be held open.... Nope, pulled the head anyhow to decarbon. Black and sooty but no huge deposits, valves seal, cyl looks good-no ridge / scoring, nice and clean, no bent valve. 28 minutes.......
What am I missing?! Do I need to yank the sucker and drop a magnetron coil into it? Thought I'd read that the magnets on the flywheel need re-polarized opposite for magnetron compared to the points ignition.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.