I made the comment about this over there. It is something I just cannot rationalize with, the excess usage of the engine brake, in flat areas + the large straight pipes etc. Jerry mentioned something about using them when shifting and I recall some trucks with certain arrangements of motor and trans., it makes sense, knocks the RPM's down a little, helps to shift. I recall Mack 5 or 6 spd (which ever you want to call it) and doing this. I never really liked that transmission, the spread is too far between gears. So many tandem dumps were like that.
In this stretch of road, a trucker that lays in on the engine brake in the wee hours of the morning is truly hated. There's a hamlet north of here with signs banning the use and for good reason.
You had to be a real truck driver back in the day, and know how to handle the truck you drove with the load on, an engine brake for certain was a nice thing to have with a heavy load on a down grade, but not 100% necessary if you knew how to drive and all the brakes were in good order.
Heck I lost a range in a 13 speed with a D8K with ripper on a 60 ton lowbed on Rt 78 headed to Rt 287 in NJ in '93, headed downhill. The air gauge was going down quickly and I had to figure out how to deal with it, with a 90,000 lb monkey on my back. That D8K was delivered to Foley Cat in Piscataway safely and is where the repair was made to the '72 heavy spec Autocar I was driving and I took out a new D8N afterward. Had I panicked, that rig and me would have been in some sort of crash. No engine brake. Just the transmission and brakes. I figured out that I could stop the trans air leak, and used those gears to get safely to their yard.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.