Posted by Jeffcat on March 16, 2019 at 14:42:48 from (50.207.7.236):
In Reply to: Propane refills posted by GordoSD on March 16, 2019 at 07:26:38:
Somethings that I learned many years ago. On the 20lb tank look at the side of the valve. There should be a little slotted screw maybe 5/16 across. When you get the tank filled you want to crack that valve open just a bit. When the tank is almost full liquid will start to spit out of that little bleed valve. Will let you get almost another pound of LP in the tank. Now on the little toy tanks many of them have a bleeder that is the same as a tire shrader valve. When you are filling your little tank you want to take a BIC pen and push that valve open. Look at the top of a regular blue propane cylinder to see one. Not for nonprofessional trained DIY Crowd if you get my meaning. View this video. It is pretty good. Shows you the bleed valves.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
