Well if you can afford to spend a little money you can make your life much easier.
On the Oliver 1550 they have pressure on the hydraulics even if you work the lever when they are shut off. I hated the factory couplers on my Oliver 1655. I switched it over to the lever release Tisco couplers 20 years ago. They are pioneer fittings with a lever that opens the check balls on the fittings after you couple the hoses. you can hook them under pressure easily. Just stick you hose coupler in and then flip the lever to open the balls. I made a bracket that holed this style coupler solid on the right side of the tractor. I stacked the two sets of couplers. The Part number for the coupler is QC 9500-4, they cost around $200 a set.
Then I am assuming that the 1020 your talking about is a JD utility tractor. On that tractor switch the couplers over to the ISO conversion kit. That makes it work like the Tisco coupler I am talking about. Then you can put Pioneer ends on all your hoses and not use any adaptors to hook to different models/makes of tractors. The ISO conversion kits cost around $100-125.
So for $500-700 you can make your life easier when it comes to hooking up hydraulic hoses.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.