Tractor Talk Discussion Board |
Farmall H generator
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim K. on November 18, 2001 at 17:38:28 from (204.248.23.98):
The Delco-Remy 6-volt generator on my Farmall H is capable of making 9 volts. The voltage regulator was not functioning properly. I'm guessing because someone had grounded the wire from the field terminal, and that kind of melted the innards on the regulator. I purchased a new voltage regulator from IH. The new regulator mounted to the generator, but it had four terminals instead of three, and required a little rewiring. Namely, removing the headlight resistor from the charging circuit, and running a new wire from the L terminal of the new regulator to the main switch to power the lights. The most interesting thing about the kit was it contained a resistor that mounted between the F terminal on the regulator and the field terminal on the generator. The regulator is now working, because for the first time the ammeter is showing a charge. But the voltage output of the generator is only a little better than 7 volts, and that doesn't seem to be enough to keep the battery charged. After fully charging the battery out of the tractor and then mowing with the tractor for several hours, there isn't enough juice left in the battery to turn the starter. The starter has always worked fine when the battery is fully charged, and the cables are new 1 guage. I'm stumped and I'm wondering if I should remove the IH supplied resistor that came with the voltage regulator? Does anyone have any ideas?
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|