|
Tractor Talk Discussion Board |
Re: Tube or tubeless tires - is one better?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steven@nd on December 19, 2001 at 15:41:00 from (165.234.132.36):
In Reply to: Tube or tubeless tires - is one better? posted by JAE-Tx on December 19, 2001 at 13:20:20:
We had fluid put in the rear tires on our 2590 Case. We have 20.8x38 radial tubeless tires on it. In order to put tubes in the tires we would have had to take the duals off and dismount the tires. The duals are on hubs, but have heavy cast centers. Removing and replacing the duals would have taken the 2 of us at least a day. Plus the added labor of dismounting and remounting the inside tires, plus cost of tubes. Needless to say there are no tubes and they are full of chloride. Tire man brought up an interesting point when we complained of the worry of rusting out rims with chloride in direct contact: IN ORDER FOR RUSTING TO OCCUR YOU NEED OXYGEN. There is very little oxygen in a tire, and the rusting that will occur with that slight amount of oxygen will not amount to anything. Remember rust is iron oxide - iron combined with oxygen. No oxygen=no rust. Fill your tubeless tires with chloride and sleep well. I do not know the difference between tube and tubeless tires, but I can recommend to go with long bar/long bar radials as they will have excellent traction and wear. Steven
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
