Tractor Talk Discussion Board |
Re: OT - Heat Pump vs. Air Conditioner
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John Mann on January 24, 2002 at 13:27:17 from (216.79.71.20):
In Reply to: OT - Heat Pump vs. Air Conditioner posted by ShepFL on January 24, 2002 at 06:49:23:
I own a small heating cooling business in Ky. I agree with the water source heatpump. A way to consider this is by the S.E.E.R. , which is comparable to miles per gallon. Base models are 10 seer, a geathermal unit is as high as 21 seer. Yes it will cost more to install but you will really like the AC as you have a higher average daily temp. The water furnace brand is ok I personally sell the Command Air which is a division of the Trane Corp. Your pond is a very good source for the heat and cool disapation, as a rule I put in 180' of line per ton. Another consideration is you don't need a condenser setting outside. No noise on the patio etc. Be sure to have your hvac contractor to do a heat loss , gain for proper sizing. An air to air heatpump works well also I personally have this in my home. My heatpump is a 12 seer Figidaire , I wish I had spent a little more for the water source heatpump. Good Luck
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|