Good evening David g... The last Recp. Compressor station I was involved with had two monster Clark V-16's.. There were six pipes, 30" diameter .375 wall X 50' long buried in the ground. These storage Vessels/ Pipes were maintained at 240 PSI Air pressure.
When a start sequence was initiated on one of the Clarks, the Engine would start to turn over on starting air...how long and at what RPM evades me now. I would say probably the unit was on starting air for at least 20>45 RPM's. At some point after 20>45 RPMs the AIR assist on both TURBOS would energize.
As starting air was still turning the engine over, both TURBOS were also being spooled up on starting air. With the ignition energised, fuel enabled to the engine, ignition retarded (2 STROKE ENGINE)the turbo assist had to stay energized to the turbos until the engine was placed on load. When the governor started to increase fuel, heat was produced to sustain Turbos. Turbo assist air was then shut off.
As long as ENGINE was NOT UNDRELOAD the TURBO assist had to be maintained.
If unit had a failed start / load sequence, there was ONLY one more air volume left to try the second start.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
