Tractor Talk Discussion Board |
Re: Case LA
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Lee FOrbush on December 11, 1998 at 17:14:24:
In Reply to: Case LA posted by H. L. on December 09, 1998 at 05:15:41:
their is a timing hole in the clutch bell housing where you lin up the hole with a mark on the flywheel. It is too hard to see mark. What I do is take out the number 1 spark plug and crank engine over by hand till you feel compression building on your finger when you stick it in the hole. Stick a wire down the hole on top of the piston. Turn engine over by fan blade till you see piston come to TDC by feeling the wire go up and down when you rock the fan back and forth. Next find number one cylinder on mag by holding number 1 wire next to mag and turn magg over with adjustable wrench. right after mag impulses on number 1 is where you want it. Don' t let it roll past that point. adjust mag driver on tractor to line up with mag. set mag points timing control to start. then start it. Adjust rest of it while running with points control on run. Never start an LA case with hand crank or electric start with out points control on mag at start. Serious injury to arm or starter will occur.
Follow Ups:
Post a Followup
|