Posted by John in Mich on January 09, 2020 at 17:18:02 from (98.224.238.10):
In Reply to: Moving A House posted by rusty6 on January 09, 2020 at 12:20:11:
My father purchased a 24x40 1 and 1/2 story house for $600 in 1966 that had to be torn down or moved. He had a foundation poured and blocks layed on the corner of the farm 8 miles away for a crawl space. Utility companies wanted $5000 for moving wires and lights. Dad said no. We split the roof at the ridge and layed the roof down on the upstairs floor. The moving company had the beams in place and wheels at each end. The front was steerable. Once on the street, the house moved the 8 miles on two lane paved roads with a police escourt in one hour. It then had to cross a 4 foot deep ditch to get to the foundation. By 5pm the house was sitting on the new foundation. We put the roof back up and added a dormer all the way across the back 40' roof line which I later finished as 2 bedrooms, a full bathrooom and walk-in hall closet. Later, I added a 24x24 garage with an 8x10 enclosed breezeway/laundry room. We lived there 17 years and then bought our current property 10 miles away and built a new house. We have been here 35 years.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.