Posted by Steve@Advance on January 24, 2020 at 07:56:24 from (66.169.147.211):
In Reply to: Wiring posted by Ferguson to-30 on January 24, 2020 at 06:34:19:
The amp meter- The battery should be on one terminal, alternator and switch feed on the other.
Ignition switch- The feed from the amp meter needs to be on the "BAT" terminal, the power to the coil and alt #1 go on the "IGN" terminal.
Alternator- The wire from the ignition switch to the #1 alt terminal needs a diode, or a 10 ohm, 10 watt resistor, or a small instrument lamp wired in series.
Alternator note: I see you labeled the terminals 1R and 2F. Is this an internal regulated alternator? If the terminals are parallel as in "II" with a square plug, it is an external and needs a regulator. If the plug terminals are end to end "- -" with a rectangular plug, it is an internal regulated and will work as drawn.
Wire gauge: The wire from the alt #1 and #2 can be 14ga. Be sure to use low voltage automotive wire, not stranded house wire. Automotive wire is finer strand, more flexible and vibration resistant.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
