Posted by hoader292 on April 14, 2020 at 17:58:04 from (45.46.226.175):
I have PTO and transmission pump pressure problems on a 2955 green and yellow lemon. We were getting pressure drops at the PTO port that we couldn't explain. We split the tractor and had the PTO clutch and transmission pump checked out at a John Deere place to be rebuilt. I was told to get a #8 o ring fitting for the pressure gauge. I looked at the shifter cover and saw 2 #8 fittings. I unscrewed one and was absolutely unprepared for what happened next. The cap disappeared and 2 springs popped up in its place. I later heard something touchdown somewhere behind me. Went back to the John Deere place for a cap, o ring and four shims. Of course I have no idea how many shims were there originally. We made one and the pressure still is not as high as we would like 160 to 170 PSI. Each shim adds 2 PSI and it is slightly below 150 PSI. Is 2 PSI normal for each shim or should should the pressure change be useful?
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
