Posted by Pete in Holland MI on April 28, 2020 at 20:48:41 from (68.188.148.217):
In Reply to: Changing Oil posted by Binderson on April 28, 2020 at 20:35:07:
This gets asked nearly weekly. The manual was based on oil technology in the 30's, so disregard that.
If the oil pan is relatively clean inside, 15w-40 Rotella is a favorite. Some people will stick with a straight 30 weight. 10w-30 for others. All of these are detergent oils, which some will argue will loosen up all old sludge, block the oil galleries, then wreck the engine. Have not heard of that happen in all of my years.
If it hasn't been run in years, would suggest draining the oil, then pull one of the inspection covers on the side. Reach down and check for sludge in the bottom of the pan. More than 1/2", drop the pan and clean it out. Less than that, fill it with new detergent oil. Run it till it gets good and hot at a higher speed, then drain the oil and refill with detergent oil. This way, you have a base line as to the cleanliness of the oil system.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
