You've already done the first step, running a compression test.
Next step is to get the valve cover off, look things over.
For it to suddenly lost all compression is a sign of a sudden failure, like a broken valve spring, stuck valve, seat come out, pushrod bent or broken.
Once the cover is off you can probably see the problem and determine if it can be repaired without pulling the head.
The coolant in the oil can be a head gasket, or it can be leaking orings at the bottom of the cylinder sleeves. I would suspect the orings if there were no other problems like overheating, coolant froth under the valve cover, or coming out the breather tube. Changing the orings is no small job. The liners will have to be removed and the bottom of the block thoroughly cleaned. If the rest of the engine is getting tired, might be time to do the whole job and be done with it.
If you are not going to replace the orings, and are taking the head off, be sure to clamp the liners down with bolts and flat washers. Otherwise they will ride up if the engine is turned. If any ride up, the seal will be broken and will for sure leak.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
