Posted by showcrop on October 25, 2020 at 04:08:31 from (75.68.37.174):
I have been doing a lot of work on my old post and beam barn recently. This is how I lifted one corner. I had jack stands under the forks before going to work on it.
.
This is eight feet to the left.
. This is where I lifted a plank to get access to the top of a beam in order to spray boric acid solution on the top of it.
This is a shot of where I took up floor boards and a broken beam. and sprayed acid all around the edges.
This is underneath jacking a beam in order to lift a post that bears on the beam way to the right. In the middle of the night I got the idea of fabricating the little I-beam from two pieces of channel stock. I have raised it 5/8 inch so far. It looks like another half inch will bring the exterior up enough.
I was working on the main floor yesterday when I heard a wood pecker nearby. It sounded like it was at my shop. Well, he was under the soffit of the gable end of my old post and beam barn really going to town, and I thought "Oh cra*p I have bugs up there". Well he continued a little then stop and poked around then skipped up a few inches, stopped, then a few more and stopped, then after checking along fifteen feet he flew away. I am hopeful that his search was fruitless.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoring a John Deere 2010 Diesel Tractor - by Jim Nielsen. Following seven years working in California's Silicon Valley, my wife, baby son and I moved back to Australia to retire. We bought a small 'farm' of about 50 acres near Bendigo, in the state of Victoria. I soon found that it would be very useful to have a tractor around the place for things such as grading our long drive and brush-hogging the fields. I was also embarking on planting 1000 eucalyptus trees, and hence I would need a ripper, small disk plow, sprayer etc. to get these things accompli
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
