Posted by David G on November 09, 2020 at 06:16:32 from (209.181.208.169):
In Reply to: Plowing posted by J. Schwiebert on November 08, 2020 at 19:09:21:
I see the results that Loren and SV get with plowing and it impresses me. I also have enough hills here that I see the erosion on ground that I do not keep covered. My grandfather bought and built up ground in northern MO with rotation, green manure and plowing. I would think that a long term mix of rotation, plowing, no till and ripping would be optimum.
I have decided not to plow, mainly because I do not want to make the effort. I have had a lot of large equipment on fields and waterways this year due to debris removal from the Derecho, so plan to rip everything, then run soil finisher over it and early liberty link beans on all. I will then reestablish the grass and cover crop the fields. I have had some erosion even with no till, so plan to convert all my headlands to grass hay so I can contour plant. Moving forward, I will plant deep penetrating cover crops on the years I run beans, as winter comes too early here for successful cover on corn.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.