Posted by used red MN on January 21, 2022 at 21:13:36 from (67.44.240.27):
In Reply to: Internasjonal. 633 posted by Vintage ihi on January 21, 2022 at 14:49:29:
Vintage welcome to YT! It is obvious that you are not able to use English very well. So it is hard to figure out what your post means. Your tractor is probably a European model so I do not know how much different it is from a USA model. The information I have from a repair manual does not say that the bolts need to be replaced when replacing the head gasket. So only if there is something wrong with the bolts like bad threads or stretching that you can see would mean they should be replaced. Now if information comes with the gaskets that says they should be replaced I would then follow that and replace them. If you decide to replace them here are the part numbers (6 required) 3138747R1 BOLT,Cyl Hd, 9/16 - 12 x 123mm (8 required) 3138748R1 BOLT,Flng, 9/16 - 12 x 5-3/4 (146mm) It is very important that the surface of the head is checked to be flat with a proper straight edge.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A City Guy's First Tractor - by Fred Hambrecht. After living in apartments in Atlanta for more years than I care to remember, the wife and I decided to move to the country. Humming "Green Acres is the place for me..." we purchased a 29 acre tract about 60 miles south of Atlanta. Next came the house, I could talk about that ordeal for another two weeks... But, I want to talk about my tractor! We didn't even own a lawnmower, and all of a sudden we had enough grass to feed all the starving children of the bovine world. Naturally, I talked
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
