Posted by andy r on March 24, 2022 at 18:57:35 from (208.126.193.44):
In Reply to: Reusing head gasket posted by 37 chief on March 24, 2022 at 16:14:22:
I have reused a head gasket on a John Deere 620. The tractor had swallowed a choke butterfly screw. That little screw made a terrible noise. Sounded like a rod or main bearing had given out. Dug the screw out of the aluminum piston and put it back together. Now a couple things. First, I had heard of reusing head gaskets. Second, the head gasket was in like new shape. I believe it was metal on both sides. I had installed it in this tractor about 10 years before. I cleaned it up with a scotch pad. Thirdly, if it didn't work it would only take me a couple hours to replace it. Plus, the tractor is only used around the farmstead. I probably wouldn't consider reusing a head gasket on a higher compression engine and certainly not a diesel. I did spray a couple coats of Copper Coat gasket sealer on the gasket allowing it to dry some between and after the last coat. Worked fine and it didn't even have the occasional John Deere 2 cylinder antifreeze leak across the top of the head/block!
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.