Posted by super99 on July 10, 2022 at 16:33:10 from (184.20.235.0):
The left brake pinion seal is leaking on my Oliver 1550. I changed it last year and the shaft was rusted really bad, it should have a different shaft installed, But I haven't had the energy or motivation to tear the rear end apart to replace it. At that time, I worked on it with emery cloth to get it fairly smooth and installed a new seal. So much for the background. Now the seal is leaking bad again, the brake housing was soaked with oil all over. I took it apart and started cleaning it up, cleaned the linings with brake clean and buried them in a bag of oil dry. I need a new seal and don't have time to order one from Agco., I can get one from Motion Industries if I have the right part number. The Oliver parts book gives the number 160 367A The Agco parts page lists alternate seal as 107 621A Is there a cross reference to find a matching number from any seal provider? The seal is intact but I'm afraid if I put a screw in it and pull it out, it will be damaged enough that they can't measure it for a replacement. It looks like the numbers on the seal are as follows 2875 3751 0438 Not sure who manufactured the seal. Any help here?? Thanks, Chris
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
