Posted by timsch on December 27, 2022 at 10:16:04 from (98.197.86.7):
I've got rust holes in the bottom of a 40 year old Kubota tank. The holes shown in the picture are from after I cleaned the inside with E85, flushed it out, and dumped in a bunch of pea gravel to shake around in soap water to free up loose gunk on the inside, and then me probing with a pick and small screwdriver to expose any other weak metal. All hole that I've found are on the bottom.
Repair options I've seen mentioned are JB Weld Tank Repair, other epoxy repairs, & welding.
The JB Weld reviews have a number of people claiming it was only a temporary fix. Similar with other expoxies.
I have welding options (MIG & TIG); my skills are decent, but still amateur level. What I would like to do is cut a patch for each hole/area, bolt it in place, and then weld it all up, but I don't have an access hole large enough for my hand to work from the other side. I'd think if I tried to weld a patch from the outside, I'd end up burning through the thin metal.
The safest bet for me probably is to try the JB Tank repair, and if that fails, revisit this again. I'd sure like to get it right the 1st time though.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.