Posted by Tx Jim on June 14, 2023 at 08:49:32 from (156.146.177.2):
In Reply to: 37 loader SCV posted by Keel74 on June 14, 2023 at 05:54:26:
Simple test: Remove FEL control valve return hose from from tractor ported filter cover. With clean container under open hyd ported filter orifice engage starter for 15 seconds. Measure oil in container which should be a little over a gallon. Next plug orifice on ported filter cover. Aim open FEL valve return hose into open hyd filler hole behind seat. With loader control valve levers in neutral start engine & no oil should exit open return hose. If no oil exits open hose then loader valve isn't causing tractor hyd or loader to get weak. If oil exits open return hose then we need to know if loader valve has a built in relief valve or a closed-center conversion plug.
With hyd oil at operating temp, 3pt raised, engine operating, look in open hyd filler hole behind seat for moving/spraying oil. Moving/spraying oil indicates faulty rockshaft control valve seals.
This post was edited by Tx Jim on 06/14/2023 at 08:58 am.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
