Tractor Talk Discussion Board |
Re: Re: Definition, please?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by JMS/MN on April 16, 2002 at 15:50:24 from (67.251.143.107):
In Reply to: Re: Definition, please? posted by Steven@nd on April 16, 2002 at 14:15:32:
Steven is right, however, it also refers to a single-acting system on a pull-type machine where lift is provided by a one-way cylinder, and dropping of the machine is by gravity= single spool hydraulics. Double spool hydraulics allows for a two-way cylinder to be attached, with two hoses, allowing for power up and power down of the machine. Power down on a disc would allow for the cylinder to lower the disc to the point where the disc is in the ground, and holding the valve further would raise the wheels off the ground, raising the wheels and adding their weight, allowing for further penetration of the disc into the ground. ie: single spool remote valve has one hose, double spool remote has two hoses. Dual remotes means TWO separate remotes, allowing for two separate cylinders to be used. Usually those remotes are double SPOOL- just don't confuse the terminology.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|