Tractor Talk Discussion Board |
Re: paint over rust?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Russell J.DiMaria on June 05, 2002 at 12:23:30 from (12.88.108.114):
In Reply to: paint over rust? posted by jim on February 15, 1999 at 08:57:18:

http://www.magnetpaints.com/underbody.asp Paint Directly Over Rust! CHASSIS SAVER™ Stops Rust Permanently! CHASSIS SAVER™ is a low odor, high build, single component chassis paint and underbody coating that provides unsurpassed rust and corrosion protection. Its "RUST STOPPING" properties begin by chemically bonding to clean or rusty steel to form a rock hard yet flexible, non-porous, glaze like finish that won't crack, chip or peel. CHASSIS SAVER™ works by isolating metal from moisture. Without moisture present, steel can't rust or corrode. CHASSIS SAVER™ is actually strengthened by exposure to moisture and is not affected by salt, gasoline, diesel fuel, oils, battery acids, hydraulic fluids, solvents, chemicals, or corrosives. CHASSIS SAVER™ applies easily by brush, spray or roller. High solids content permits complete finishing using only two or three coats. Use CHASSIS SAVER™ as part of your complete maintenance and refinishing system for trucks, trailers, tractors, farm and heavy equipment, buses, taxis, machinery and other commercial fleet vehicles. Typical uses include: chassis, frames, floorboards, under fenders, engine compartments, trunk areas, fire walls, etc. For best results, apply directly to clean, dry, sandblasted surfaces or over tightly adhered rust. Use MAGNET Universal Automotive Primer or MAGNAPOXY™ Primer for applications to smooth metal surfaces. While CHASSIS SAVER™ has incredible rust and corrosion resistance and can be used for all underbody applications without top coating, it is sensitive to UV light (sun) and must be top coated for direct exposure to sunlight. At NO time does it lose its Rust Stopping and Corrosion Inhibiting properties. Suitable topcoats include any MAGNET Finishing System including 4800 Series Synthetic Urethane Enamel, MAGNACRYL™ 9000 Series Acrylic Enamels or MAGNATRON™ 5000 Series Acrylic Polyurethane Enamels. http://www.magnetpaints.com/underbody.asp
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|