Tractor Talk Discussion Board |
How big of a job is this?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by jamesj on July 09, 2002 at 19:09:19 from (152.163.197.202):
I need some advice from you tractor experts! My bro bought a new house and wants the lawn graded due to water pooling in the front yard and also it needs to be seeded. I had 3 people come out to give estimates on the job. What i want done is the front yard of the house to have a gentle slope away from the house to give a nice look to it. Dont want any big hills, just a barely noticable slope. OK, so only one guy that came out to give the estimate seemed like he knew what i wanted and what he was doing. We agreed that we needed 3 10-wheeler loads of fill dirt and 2 of topsoil for the job.(We already have 1 load of topsoil on the site). So i figured all this out and in our area this comes out to about $600 worth of dirt. One estimate was at 1500 and the other is at 1700. I would much rather do the job my self and get it done exactly how i want it done! The problem is i dont have much experience with the use of a tractor and not sure how big of a job this is? I figured out that i could buy the dirt and rent a tractor for a whole week(which would allow plenty of time) and still save about 500 on the job. Now i have no problem backing a 900 horsepower yacht into a boat slip but have limited experience with running a tractor. I have dug a few garden ponds with a backhoe, thats all! What do you guys think about this job? What type of tractor would i need? implements? thanks to all jamesj
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|