Delco Remy Cutout Relay specifications needed

Posted by Bobduck on July 15, 2002 at 14:00:11 from (209.206.226.174):

Working on my Oliver 70 - the Cutout Relay on generator.

Cutout points weren't closing and discovered there was rust preventing them from closing.

Cleaned the rust out so the Cutout now works but had to disassemble the Cutout to do the cleaning.

Would now like to correctly set the "Air Gap" and "point gap" and "closing voltage" range but can't find the specifications.

Generator is a Delco Remy six volt and the Cutout on the generator is #1116809.

Anyone out there have this information?

Thanks in advance.

Bobduck

Follow Ups:

• Re: Delco Remy Cutout Relay specifications needed The Red 14:36:39 07/15/02 (1)
  • Re: Re: Delco Remy Cutout Relay specifications needed Boyd 05:24:46 07/16/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Delco Remy Cutout Relay specifications needed Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]