Tractor Talk Discussion Board |
Re: Re: Costco Tractor Fluid?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hal on September 02, 2002 at 10:11:29 from (24.188.49.98):
In Reply to: Re: Costco Tractor Fluid? posted by Chuck, WA on September 02, 2002 at 07:18:24:
A quote from Big Dean website: "On the older tractor before the 100 series it is recommend that you use the 80/90-weight mineral oil. Massey # M1103. There has been a lot of controversy on the tractor boards about this. Here are my thoughts on this. The Reg. gear oil will work but sooner or later you will probably have problems with using it. The paraffin in this oil will gum up the valves and filter & you will have to tear the pump down to clean it out. It will also build up on the sides of the gearboxes causing more problems later. I have seen this problem so many time though the years. These tractors can use the same oil that the newer tractors use if the hydraulics is in good shape. this oil is Perm-A-Tran 3 or the old number is M1129A. Some people use Perm-A-Tran 3 in the winter & switch to the M1103 in the summer. If the oil is still clean with no water in it you can save it & reuse it." The problem he talks about is if you used the 80-90 gear oil like you saw at Costco or from any oil company that is designed for auto/truck differentials. The Permatran type will do a great job, but notice he adds the caution "if the hydraulics is in good shape"; if things are worn you could have poor performance/leaks, especially in hot weather. You can still get the 80-90 mineral from Agco (pn MF841718M1) which they call M1103 oil.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|