Tractor Talk Discussion Board |
Re: prepare gas tanks for storage
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by G-MAN on September 04, 2002 at 15:17:52 from (206.106.139.74):
In Reply to: prepare gas tanks for storage posted by Edward Telesz on September 04, 2002 at 13:38:59:
That depends on how long the tractors will be stored and the environment they will be stored in. If there are hot-cold cycles, either full or empty, the tank will still get condensation in it. If you're only storing them for a few months or so, I would just fill them up and leave them as good quality gas will easily keep that long. If you're storing them for 6 months to a year, I would fill the tanks completely and add a sufficient quantity of a fuel stabilizer like Sta-Bil to keep the gas fresh. Run the tractor with that in it, then shut off the fuel and allow the engine to runs itself out of gas so the carb is dry. If you're going to be storing them for longer than a year, I would drain the tank completely and run the engine out of fuel. Providing that the tank is in good shape, there shouldn't really be much damage caused by condensation and the like. You might consider cleaning and sealing the tanks before storing the tractors. I would also change the oil and filter, remove the spark plugs and put some oil in the cylinders and block the tractor up to keep the tires off the ground if it has rubber tires and will be stored for a long time. Some companies make preservative oils, but any good quality motor oil will work well. After that, I would thoroughly seal the intake and exhaust. Some guys also back off the rockers, so the valve springs aren't kept under tension, but they may be overkill on an old tractor. It's also a good idea to remove and fully charge the battery, then store it in a cool dry place up on two by fours or something. Don't let it sit on concrete. You might also want to clean and paint any bare metal surfaces to prevent corrosion. Finally, either use the starter or hand crank the engine every month or so to keep everything free and lubricated. My two cents.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|