Tractor Talk Discussion Board |
Re: Re: Re: Re: Things of Marginal Value
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by G-MAN on September 06, 2002 at 10:56:46 from (206.106.139.74):
In Reply to: Re: Re: Re: Things of Marginal Value posted by Steven@nd on September 06, 2002 at 10:13:13:
On the oil issue, those are generally best case scenarios that are listed, kind of like service recommendations on cars. Car operators manuals usually say something like a 6000 mile oil-change interval, unless it's operated in certain conditions. The trouble is, nearly every car on the road fits into the certain conditions that require more frequent maintenance, lol. Oil itself does not wear out - it will never lose it's lubricity. What does wear out is the additive package - anti-corrosion agents, detergents, anti-friction agents and so forth. It's also not generally known that an oil filter actually filters better as it goes along, because the buildup of contaminates on the filter media leads to smaller and smaller paths for the oil to flow through. Obviously, at a certain point, the filter will become completely plugged and then bypass - not good. JD Plus 50 oil is designed and proven by JD to extend the oil change interval by 50 percent without losing the additives. So, if you normally run 100 hours, you can run Plus 50 for 150 hours, and so on. It's a good idea to change oil often, but if you're doing it too often, you're actually wasting money because you're changing the oil before it's necessary. Kind of like overhauling an engine that isn't worn out. The oil looks "dirty" because it's doing it's job, catching contaminants and keeping them in suspension, rather than letting them build up on internal engine components. I think 100 to 150 hours is a pretty good interval, though, especially if the tractor is subjected to a lot of idling, cold starts and so on.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|