|
Tractor Talk Discussion Board |
Re: Raising a Beef...?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jerry S on November 12, 2002 at 10:45:46 from (63.71.59.98):
In Reply to: Raising a Beef...? posted by T_Bone on November 11, 2002 at 22:10:06:
T Bone, you probably should plan on more than 6 months of feeding if you want to get a 200 lb animal. Do like suggested and have 2. When they are under 600 lbs or so, that grazing is the big part of the diet they would do well with supplemented with a dab of sweet feed (grain with molasses or soybean oil added). Younger calves do well with some oats added in the grain but later on you can stop the oats and cut cost some of the feed. It is cheaper to buy the grain than raise it unless you are going to raise more than one or 2 calves a year and have to buy all the materials to mix with it and then grind it etc. I take some barrels in the back of the truck to the grain elevator and buy 500 or 1000 lbs at a whack and it works nicely for a couple calves. The corn I planted fed some coons and deer nicely but not the first ear left for the cattle. Just also a note, if you can find someone else who will sell a finished steer or heifer ready to kill, it will be probably cheaper yet than doing it yourself if you are paying a market price. That means the only reason for doing this yourself is you want to take care of the cattle. My opinions only.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
