|
Tractor Talk Discussion Board |
Re: 8 volt battery charge?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Lew on November 30, 2002 at 20:42:22 from (207.190.81.65):
In Reply to: 8 volt battery charge? posted by IHMan on November 30, 2002 at 19:11:05:
To use your 12 volt charger and not have it blow a gasket, you need to have some additional resistance in the charging circuit. To drop 4 volts (12-8) at 2 amps requires a 2 ohm resistor (4V/2A) with a wattage rating of 8 watts (4Vx2A) or better. Radio Shack item 271-131 is a package of 2, 1 ohm 10 watt resistors for about 2 bucks taxes and all. Put both resistors in series with each other and your 8 volt battery. Connect to the 12 volt setting on your charger. If your 8 volt is real dead it will take a while and may not even appear to be charging for some time. Just one of the 1 ohm resistors in series will let more current through but if the current exceeds 3.33 amps the resistor will be operating at it wattage rating and may have a some what shorter life. If you cannot get the resistors, post again and I will have some other ideas that might work. We all understand to charge a 12.6 volt battery takes over 13.5 volts just as we need over 9.5 to charge a 8 volt (really an 8.4V)battery. The difference is the same, namely 4 volts.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
