Tractor Talk Discussion Board |
Re: a corrected little math for the inexpensive oil people
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ludwig - my limited experience on February 11, 2003 at 06:05:04 from (141.154.121.183):
In Reply to: a corrected little math for the inexpensive oil people posted by Lew on February 10, 2003 at 21:11:01:
In early January I found that our Mercedes diesel car wouldn't start without the blockheater running for prolonged periods because of the cold. For reference we had a long period of temps around 0. So I had the 15-40 conventional oil taken out and 10-30 synthetic put in. Before the swap the car would never start below 20 without heating. After the swap it would start down to about 5 degrees and only require about 10 minutes of heating down to about 0. Below 0 at least half an hour of heating was due. I plan to have the car on a 10k change schedule, unfortunately its got other issues so I won't be keeping it past this summer, but I was amazed at the short term benefits of the synthetic. It also appears to be leaking less oil than it did with conventional,(was leaking about 1/2qt a month) but I really need another couple months running before I can confirm that.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|