Tractor Talk Discussion Board |
Re: cleaning a sand blasted tracter?????
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmer /Paul on March 12, 2003 at 04:05:43 from (216.95.136.34):
In Reply to: cleaning a sand blasted tracter????? posted by Dave on March 12, 2003 at 01:01:28:
If the tractor was degreased and washed prior to sand blasting, you would not need to do much. Blow the machine down with your air compressor. For the sheet metal could be blown off, then wiped down with laquer thinners or clean-sol ( dupont )with 2 clean rags. 1 to apply the solvent and a follow up rag to clean right behind the solvent ( remember the Karate Kid movie wax on wax off). Once the surface is prepped go over the sheet metal with a tack rag. Once the surface is prepped you should prime with zinc chromate or expoxy based primer to seal off the clean metal from rust.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|