|
Tractor Talk Discussion Board |
Re: Re: First tractor puchase....PTO question
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by paul on March 31, 2003 at 18:12:57 from (206.10.55.96):
In Reply to: Re: First tractor puchase....PTO question posted by david on March 31, 2003 at 07:16:48:
I would disagree with 2 things, but a good explination. Live has always been decribed to me as having a second clutch. Basically the live 2-stage clutch in a Ford x6x series tractor. I have never heard of a live pto as having only one clutch - ever. It would still then not be free-wheeling. Then I have not heard of a 2-stage clutch as being 'independent' at all. It is just live, not independent? To me, independent has always meant totally & completely independent of the foot pedal & clutch. Independent can be made to spin or stop at any time, no matter what you are doing with the tranny clutch. My H has a dependent pto - it always spins at the same rpm, but is not live or independent. The Ford 960 & 1720 have a live clutch - 2-stage clutch within a clutch, you can shift gears in the tranny with the pto still powered. You do need to stop moving forward to put the pto in gear. The IH 300 & s77 Oliver are independent - they have a lever that controls the pto clutch all by itself - totally independent of whatever I am doing with the tranny & foot clutch. The Ford 7700 & TW-20 have independent hyd clutches - work as the previous, but the lever uses hydraulics to move the pto clutch. Many of us do not like the hydraulic clutches. They mostly all have a hydraulic brake. They mostly all are 'instant on' or 'instant off' and can be very, very hard on certain pto equipment - no feathering. This depends on what you do & what you are used to. But some of these can really slam flywheel equipment hard, or twist the pto shaft/ strip gears on a grain auger for example. --->Paul
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
