Tractor Talk Discussion Board |
Re: Jubilee died today
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Fred on April 16, 2003 at 15:32:19 from (146.186.226.158):
In Reply to: Jubilee died today posted by Fred on April 14, 2003 at 19:03:06:
Paul, Tom, and Glenn, Well, the Jubilee was resurructed today. After checking everything and checking the charge of the battery (and re-charging it) I used the time while the battery was charging to double-check all of the connections, clean and run a test on the switches. I also checked the distributor, the coil, and even tore open and cleaned the sediment bowl again, and cleaned and adjusted the carburetor. As I was fiddling around with the connections at the key switch (I did order a new one anyway) I moved the Battery cable. Guess what??? The connector end of the cable just fell off!!! The cable was totally loose in the connector. This is why the battery didn't want to always charge...why heavy work seemed to shut it down...why rough ground gave the engine a fit...and why jiggling the wires sometimes made it start (jostled the cable enough to get a good connection) I heavy crimped the cable in place and will get a new one tomorrow. After crimping the cable and re-installing the battery- she started right up! Anyway, thanks for all of your help and have a good Easter. -Fred
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|