Tractor Talk Discussion Board |
Re: Mini excavator
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by TimV on May 07, 2003 at 06:13:46 from (12.39.239.130):
In Reply to: Mini excavator posted by Dave on May 07, 2003 at 04:28:05:
Dave: I've had a bit of seat time in a couple of these, and it's amazing the amount of work you can do with one. I've also owned a full-size backhoe, and while the full-size machine is faster (at least the actual digging) the little trackhoe will move short distances (like along a trench) faster, and requires less set-up time once you get there--just lower the blade and dig. It's the cat's pajamas for ditching and backfilling, small excavations, and similar chores. There are very few things that the typical 3-point mounted hoe can do that the small excavator cannot, particularly as the 3-point backhoe is not a purpose-built machine like a full-blown TLB setup. The main flip side is cost. If you already have a tractor, it's a lot cheaper to buy a backhoe, even a new one, than it is to buy the entire machine. One possibility is Northern Tool--in the last year or two they've started offering used mini-excavators from about $12,000 and up. Their website has some details, their catalog has more, and I'm sure you could get even more if you're serious about purchasing one. They also offer new 3-point backhoes if you want to go that route. I can't vouch for their quality--I've had no experience with their excavators, but I do own one of their Trencherman II's, and I've been VERY happy with that.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|