Tractor Talk Discussion Board |
Re: tire tread depth
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Harold Hubbard on May 29, 2003 at 04:25:45 from (216.114.181.203):
In Reply to: tire tread depth posted by bob on May 28, 2003 at 18:57:24:
In my opinion, the overall condition of the tires would be more important than the amount of tread. Unless somebody has been hauling up and down the paved road pretty regularly with them, or doing heavy tillage full time, the tread will outlast the casing. I obviously don't know what you are planning to do with the tractor, but if it's not a full time working tractor you can get away with a lot less tread than you think. Look for visible damage and weather-checking/dry rot between the bars, and on the sidewalls, then flex the sidewalls and look for cracks. Some times a really good looking tire has set in one place for ten years and cracked only where the tractor weight flexed it against the ground. Another thing that really tears them up is running under-inflated, that will show as cracks at the edge of the tread sort of outlining the end of the bars.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|