Tractor Talk Discussion Board |
Re: Need you guys to talk me outa something...I th
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ludwig on June 25, 2003 at 07:27:27 from (68.163.108.216):
In Reply to: Need you guys to talk me outa something...I think. posted by DHR on June 24, 2003 at 19:14:11:
Wow, You've really gotten the gamut for advice. 2700# tractor huh? Well, I figure my Regular to weigh in at about 4000, add the trailer and we're up around 5500#. I've got a '96 Dodge Dakota with a 318 V8 and tow package. I won't say the Dakota walked away with it, there was one hill that has railroad tracks at the bottom and we never got out of first going up that one, but spent 250 miles at highway speed and never had an issue. So yeah, take your 2700#, find an appropriately sized trailer, DON'T plan on taking your implements if you need them make 2 trips. You don't need an 18' trailer for this, that big a trailer is going to do nothing but help overload your truck. 16' is plenty. Then compare the weight of the trailer and tractor to the tow rating on the truck. If your not going to do this much then I wouldn't worry about going a bit over. If this will be frequent, like bringing the tractor home every night then consider picking up an old Dakota or a fullsized half ton truck. The ones that said to pay carefull attention to the trailer brakes and tires are absolutely right, this is not a time to cut your preventative maintanence down. Also spend some time playing with your brake controller with the trailer loaded at low speeds to get it set real good, then realize it'll be different at higher speed. I played alot at 25mph before I was very comfortable with what I was doing. Even then I wouldn't do it often. If I get to the point where I want to tow my tractor alot I'll get a bigger truck. Also make sure the thing is chained down good, you don't want it getting loose on you. The guys that suggested you need a 3/4 ton or 1 ton truck for this job are NUTS. Thats overkill, why buy 2x or 3x the truck you need just to have it sit in the weeds most of the time?
Follow Ups:
Home
| Forums
Today's Featured Article -
An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|