Tractor Talk Discussion Board |
Re: Tractor Oil, transmission question
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rlach on July 01, 2003 at 19:59:20 from (67.68.148.68):
In Reply to: Tractor Oil, transmission question posted by Chuck on July 01, 2003 at 09:57:17:
Chuck, They are separates, the clutch housing separates the engine and tranny; the dipstick should be on right side behind brake pedals. Engine oil should be changed at every 100 hours, some will say 200 hrs, it is your decision(200 hours at 50 mph is equivalent to 10000 miles for an automobile, who change oil at ...); for the tranny, I use Hytran(or equivalent ;years ago they recommended SAE 90) and 1000 hours life is a minimum, again your decision and related to dirty appearance of oil; if there is remote hyd, oil gets dirty more rapidly. If no remotes, oil level should be constant height. Add grease once every 20 hrs at all grease fittings(small quantity, but more often); change oil in the air filter every 10 hours, or more frequently if working in dust conditions. Also there is a sediment bowl for gas, clean it frequently when engine is cold, by the way, the glass is fragile; dont forget to clean the radiator(outside) and never add water from a sluice to a radiator. Finally, use draw bar to work safely, not the third point on the 3-point hitch; a tractor is ... a tractor, not a formule-1. MF-50 is a very fine tractor, have fun. Rlach
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|