Tractor Talk Discussion Board |
What's the best grease?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wayne on July 07, 2003 at 21:34:54 from (205.188.209.105):
Hey guys, we're working on a 71B Bucyrus Erie crane for a customer, and in tearing it down we're finding evidence that the operator has been greasing it, but that the grease just doesn't seem to be "hanging around" in the bushings like it should. Basically you can see the evidence of the grease being forced out between the bushings and the pins from greasing it as well as from operating it, but when you take them apart the inner areas don't seem to have any grease film on them at all. Now I've seen cases where the wrong grease was used, (like a customer that tried a graphite based product that was worthless and caused every new bushing we had installed to wear out in 6 months), and machines where it's painfully obvious that it isn't getting greased at all, but this is different. According to the BE lube chart, they are using the recommended grease, so that in itself isn't the problem. What they are using is a Shell Alvania 2EP grease which being an extreme pressure grease ought to be right, but still the problem. Ok, that's the problem, here's the question-- I've always heard good things about Lubrication Engineers, and have one customer that has sworn by them for over 30 years and has the results to back him, but what about the rest of ya'll. What grease do you use in your most extreeme applications and how does it hold up? Thanks for any opinions you can offer up. Wayne
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|